Hello,
I'm working with a Fanuc s420 i W robot with a RJ2 controller.
The RJ2 has a profibuscard ( A16B 3200 0220/02A600159 ) which I connected to a PLC (slave).
I got a GSD-file from this PLC to set up the connection.
Could someone tell me how I can load the GSD-file to the RJ2 controller?
Or isn't this possible?
And how should I configure the parameters of the profibus in the TP?
I don't have any manual of this profibuscard, so any help/manual about setting up this profibusconnection is helpfull!
Thanks