I need Arcware for my robot 3HAB2396-1/22 System Key 3.1
Thanks in advance. my email: makszurs1989@gmail.com
I need Arcware for my robot 3HAB2396-1/22 System Key 3.1
Thanks in advance. my email: makszurs1989@gmail.com
Just to verify - you already have a known good system 3.1 key disk and just need the 3.1 disk pack?
If you have the key disk, it will load ArcWare from the disk pack.
ABB will usually give you a link to download the disk pack.
I have good system key disk 3.1 but ABB wants 800 euro for arcware from me.
Not sure of what you need. If you have a good key disk, then you just need the 3.1 disk pack.
Looking at the Key disk, view file key.txt with Notepad or some other text editor. It should give a list of what is authorized to load.
If it does not list ArcWare, then ABB is charging you for a new Key disk that adds ArcWare.
If you are not sure, then post the key.txt file and so we can see what the issue may be.
I dont have a arcware disk:
3HAB2396-1/22 System Key 3.1
Serial no 24-12152
512 BaseWare OS Plus
576 Swedish
No Ext Axes
2400L M98A
530 Advanced Functions
538 IO Plus
the abb fee is too high, especially since it's an old robot
I got it - the 800 EUR is for ABB to add 551 ArcWare to the current key. I thought you might be looking for the disk pack.
I understand it's a lot of money for an old robot. Around 25 yrs ago, I was paying 400 then 500 USD just to get a reburn without any additions.