I am trying to make sure that I have enough holding force for the magnets in the end of arm tooling. I have recorded and can see and view the path traces, as well as all the reducer info and everything in the profiler tool and in MotionPro. However I can't see anywhere that will let me get a plot of acceleration, or a way that will let me export the veclocity plots or combine velocity with distance or anything. I found the acceleration trace, but that isn't particularly useful. I need to get this data out of roboguide so I can either run it through solidworks simulation or do something in excel. The only data I have found that I could maybe use is the reducer speed info, which without positioning data is just about useless.
Long story short. I want to access/export the motion data so I can do some analysis to determine the amount of force I will need hold on to a part. I am not a robot person. This is only my second or so cell that I've developed in roboguide.