1. Home
    1. Dashboard
    2. Search
  2. Forum
    1. Unresolved Threads
    2. Members
      1. Recent Activities
      2. Users Online
      3. Team Members
      4. Search Members
      5. Trophys
  3. Articles
  4. Blog
  5. Videos
  6. Jobs
  7. Shop
    1. Orders
  • Login or register
  • Search
This Thread
  • Everywhere
  • This Thread
  • This Forum
  • Articles
  • Pages
  • Forum
  • Blog Articles
  • Products
  • More Options
  1. Robotforum - Support and discussion community for industrial robots and cobots
  2. Forum
  3. Industrial Robot Support and Discussion Center
  4. ABB Robot Forum
Your browser does not support videos RoboDK Software for simulation and programming
Visit our Mainsponsor
IRBCAM
Robotics Channel
Robotics Training
Advertise in robotics
Sponsored Ads

Abb s4c+ e-stop ES1 issue

  • stanH678
  • February 22, 2024 at 1:11 PM
  • Thread is Unresolved
  • stanH678
    Trophies
    2
    Posts
    1
    • February 22, 2024 at 1:11 PM
    • #1

    Hi everyone recently acquired an irb 140 m2000 s4c+. So far I've used robinstall to create a new system and installed it into the robot all is well there but I still have issues. The ES1 light is out on the panel board dsqc509 all others are lit errors concerning this are "10012 safety guard stop state""10013 emergency stop state""20221 chain conflict""20223 emergency stop conflict""20202 emergency stop open". Both cabinet and pendant estops are out and when they are pressed ES2 light goes out as expected. I have put a new panel board dsqc509 in and another teach pendant aswell but problem still remains got me scratching my head a little. I will cross reference the wiring with this unit to another s4c+ cabinet I have to see if there's any differences but I'm at a loss. Any ideas, thank you.

  • Lemster68 February 22, 2024 at 1:59 PM

    Approved the thread.
  • Viperacebb
    Reactions Received
    5
    Trophies
    2
    Posts
    26
    • February 22, 2024 at 9:12 PM
    • #2

    Hi stanH678! Sounds like you don't have the safeties tied in properly (or there's something wrong with the estop from the controller or pendant. To test this, make sure you have a jumper from A81 (backplane) X1:3 to X1:4 to X1:5 and then another jumper from X2:3 to X2:4 to X2:5. This will satisfy the ES1/ES2 top circuits. You will also need to do the same for X1:9 to X1:10 and another from X2:9 to X2:10. Place another on X1:7 to X1:8 and yet another on X2:7 to X2:8. If this doesn't help, than the issue lies with the pendant (connection came out of the contacts) or at the cabinet estop (which I've seen the little clips break off and cause this type of issue. Due to the dual chain estop, it needs to see both channels go low and then high TOGETHER or it will kick up those types of errors. Hope this helps!

Advertising from our partners

IRBCAM
Robotics Channel
Robotics Training
Advertise in robotics
Advertise in Robotics
Advertise in Robotics

Job Postings

  • Anyware Robotics is hiring!

    yzhou377 February 23, 2025 at 4:54 AM
  • How to see your Job Posting (search or recruit) here in Robot-Forum.com

    Werner Hampel November 18, 2021 at 3:44 PM
Your browser does not support videos RoboDK Software for simulation and programming

Tag Cloud

  • abb
  • Backup
  • calibration
  • Communication
  • CRX
  • DCS
  • dx100
  • dx200
  • error
  • Ethernet
  • Ethernet IP
  • external axis
  • Fanuc
  • help
  • hmi
  • I/O
  • irc5
  • IRVIsion
  • karel
  • kawasaki
  • KRC2
  • KRC4
  • KRC 4
  • KRL
  • KUKA
  • motoman
  • Offset
  • PLC
  • PROFINET
  • Program
  • Programming
  • RAPID
  • robodk
  • roboguide
  • robot
  • robotstudio
  • RSI
  • safety
  • Siemens
  • simulation
  • SPEED
  • staubli
  • tcp
  • TCP/IP
  • teach pendant
  • vision
  • Welding
  • workvisual
  • yaskawa
  • YRC1000

Thread Tag Cloud

  • abb
  • Backup
  • calibration
  • Communication
  • CRX
  • DCS
  • dx100
  • dx200
  • error
  • Ethernet
  • Ethernet IP
  • external axis
  • Fanuc
  • help
  • hmi
  • I/O
  • irc5
  • IRVIsion
  • karel
  • kawasaki
  • KRC2
  • KRC4
  • KRC 4
  • KRL
  • KUKA
  • motoman
  • Offset
  • PLC
  • PROFINET
  • Program
  • Programming
  • RAPID
  • robodk
  • roboguide
  • robot
  • robotstudio
  • RSI
  • safety
  • Siemens
  • simulation
  • SPEED
  • staubli
  • tcp
  • TCP/IP
  • teach pendant
  • vision
  • Welding
  • workvisual
  • yaskawa
  • YRC1000

Tags

  • abb
  • s4c+
  • Emergency Stop
  • s4c +
  • IRB 140
  1. Privacy Policy
  2. Legal Notice
Powered by WoltLab Suite™
As a registered Member:
* You will see no Google advertising
* You can translate posts into your local language
* You can ask questions or help the community with your knowledge
* You can thank the authors for their help
* You can receive notifications of replies or new topics on request
* We do not sell your data - we promise

JOIN OUR GREAT ROBOTICS COMMUNITY.
Don’t have an account yet? Register yourself now and be a part of our community!
Register Yourself Lost Password
Robotforum - Support and discussion community for industrial robots and cobots in the WSC-Connect App on Google Play
Robotforum - Support and discussion community for industrial robots and cobots in the WSC-Connect App on the App Store
Download