Need information about some PC program attached in image ...
it writes DV_ONLN(2,30,90)
here what i know is - 2 is board no.
and 30 is mac id .. i have no clue about third no. which is 90.
kindly help me to understand.
Need information about some PC program attached in image ...
it writes DV_ONLN(2,30,90)
here what i know is - 2 is board no.
and 30 is mac id .. i have no clue about third no. which is 90.
kindly help me to understand.
The third argument is a wait flag. It is an optional parameter.
You will find more detailed information about the KAREL programs for DeviceNet in the DeviceNet manual, e.g. B-82694EN.
what kind of wait it is ?...if you have document kindly share ...
If the argument for the wait flag is used and set to a non-zero value, the DV_ONLN routine will wait up to 10 seconds until the device is online. If the argument is set to 0 the program will continue without waiting for the online state of the device. In that case the status could be checked later with the routine BD_STCHK.
It is not allowed to share FANUC manuals. Depending on your location you can download the manuals from FANUC CRC or FANUC Portal. You could also ask your local FANUC rep. The document number for the DeviceNet manual is B-82694EN.