Just recieved this Cobot it's a CRX-15i with a R-30iB mini mate controller. When we power it on we can get all of the errors to clear except the SYST-302 error. There is nothing else listed just that error. The robot is still in a red state. We can't move, Jog or anything. I'm a little new to this robot thing, so any and all help is appreciated.
SYST-302 Please power off Error
-
ChrisH -
January 18, 2023 at 1:34 PM -
Thread is Unresolved
-
-
Not sure on CRX, but the other Collaborative robots come with a CD disk. It is the robots force sensor calibration data and you have to manually load it or you have a Brick.
Procedure is in the collaborative manual, but I have this
You will need to execute the calibration file for that robot; it should be labelled “cllb.cm” and can be found on that CD. Move the file to the root directory of a USB drive and execute the file via the Enter key.