Can you help me find the location of the jumper to activate/deactivate the hand broken function please. From searching this forum i'm told its on the e-stop board, but i have no jumpers on this board, photo attached. there are jumpers on the board in the rj2, but none labelled hbk. my software also does not have this function as some do (old unit). One place said its on an estop board attached to the robot, but my rj2 is separate from the robot.
rj2 hand broken jumper location
-
afawcett -
June 28, 2022 at 10:27 PM -
Thread is Unresolved
-
-
It’s not there.
It is on the board between the servodrive and the cpu-board on the front at the left side.
It is labeled hbk.