which interbus? the I/O fieldbus?
just got to IOSYS.INI and comment out the interbus driver... that will silence it.
which interbus? the I/O fieldbus?
just got to IOSYS.INI and comment out the interbus driver... that will silence it.
Inerbus fiber optical
Yes allready comented but still exist in system input pin.
Do you have some working basic setting so i can try with how its working.
Main question: đe si ba, može li kontakt na email haris.maglic@gmail.com zbog daljih komunikacija ako je moguće
Haris
sorry, i appreciate the offer but... no.
i would gladly converse or meet with anyone that is actively helping other people.
also i am interested if there is:
1. something that I could be learning from others
2. something to collaborate on like developing something new (that i could use)
3. getting something that I would use or have fun with.
etc.
but most people actually contacting me or asking for my contact info (and there is a lot of them) just want one thing - something for themselves (fixing their problems) and that means more work for me. frankly, i have enough of that already.
For some reason i do not get many invites for a beer or BBQ or fishing trip etc. you get the idea
.
It is ok, nothing wrong about privacy
So please what i can do next in my case??
Still i have everithing without noted error, drive ready but not drive enabled or break release!
I have no more idea then:
1. Open pm600 and check for fails but i have a 3 robot and posibility for pm600failure on all items are too low
2. Look or find or copy from someone krc working files and try.. if someone whant to share it for vkrc1 i will be thanksfull
3. ..
Barbeque offer exist and bear, house open 😁
there are few things that come to mind:
1. you can trace wiring and confirm if it is correct.
2. you can check safety board - confirm type, connections and jumper configuration.
3. you can check voltages at key connections and evaluate if reasonable
4. you can powerup one of the other two robots and see if they act differently.
5. you can contact seller
6. you can contact KUKA
7. you can post more pictures of relevant components/connections/indication/measurements etc. so others can try to help with diagnostics, for example confirm (or disprove) your tests and conclusions.
Thank you for given time, i have already checked many listed items and i will try one more recheck of all and from begining.
It will take a time for sure again but that’s it.
Of course when i found solution i will inform.
Haris