Hi .....
I have a IRC5 with RW5.15
DeviceNet with Beckhoff BK5200 and a KL3061 Analog Input card 0-10V
on the input is a analog 0-10V distance Sensor (CP24MHT80)
The Unit runs and i can see the correct Value in case i configure it as a GI
But.....
i want use it as a AI!
The Sensor gives me 0-10V by 40-160mm.
When i set the minimum logical Value of 40, i receive a Fault
71141, Standardwert für E/A-Signal außerhalb
Bereich
in Case i set the Value of 0 or negative it works, but i have wrong Data
Any Ideas ??