Good day, Intermediate user of Fanuc robots. We have a bunch of Rj3 robots that I'd like to know are in auto before starting the line. Now I know the configuration you can set when in Auto DO X is on and T1 DOY is on. And I have done this, but they are not taking, they do not go away just will not indicate the keys position. Worse yet one robot does have this functioning, how ever to make the same in IO structure wish to re-assessing them. Had done so but they did not take either. The worse part is the old assignment is still operating, even if the configuration has the new ones set. And yes did a power cycle after setting values and they hold in the configuration, just do not work. Any thoughts?