Contemplated this, however not a true positive in auto indicator. This also doe not answer the pre-assigned but no longer needed ones still holding there assignment.
Posts by Barqs1968
-
-
Good day, Intermediate user of Fanuc robots. We have a bunch of Rj3 robots that I'd like to know are in auto before starting the line. Now I know the configuration you can set when in Auto DO X is on and T1 DOY is on. And I have done this, but they are not taking, they do not go away just will not indicate the keys position. Worse yet one robot does have this functioning, how ever to make the same in IO structure wish to re-assessing them. Had done so but they did not take either. The worse part is the old assignment is still operating, even if the configuration has the new ones set. And yes did a power cycle after setting values and they hold in the configuration, just do not work. Any thoughts?
-
What do you do when after setting them and cycled power, they still do not work? Worse yet they operate there old values but still have the new ones in the configuration.
-
What do you do if you assigned DO's but it does not work. Fully mapped DO's not used elsewhere, but they do not change state. Also if assigned in the past, why does it not change to the new one now?