Has anyone had the "DO Jmove ....." ever not work for them in repeat mode? I have my speed at 20%, I've tried check once and check continuous. Im not sure what else could be holding this up? I have no program running currently. If I re-issue the same command again it will say program running.
Do Jmove Not working?
-
ericwiz7923 -
July 8, 2020 at 2:35 AM -
Thread is marked as Resolved.
-
-
Check once/Check Continuous is only applicable in Teach Mode.
Repeat once/Repeat Continuous is applicable for Repeat Mode, but will not prevent the robot moving from a DO command.
Check the robot is not in hold, or that external hold is not active.
-
Thank you for clarifying my terminology. I found the root cause. 100% my error. lower case L's and ones are pretty much identical on the teach pendant. Shame on me and my ancestors.