Dobrý den prosím o řadách zapojených do NX 100 otočný stul IRBP 750 R
NX 100
-
Brona Javora -
June 15, 2020 at 5:07 PM -
Thread is Unresolved
-
-
Is the rotary table driven by air, inverter, or to driven directly by the NX controller? Air or inverter would be driven by I/O. Directly by the NX some of the connections would be from/to the external axis amplifier. Some of the connections would be to the EAXA-B daughter board.