Anyone know anything about SRVO-289 Smooth Stop? This is a new 1 to me & the alarm documentation is of no help. Our customer is doing all the PLC/HMI control & I wasn't sure if this was something coming from how they are controlling the UOPs. Always accompanies another alarm like Fence Open or something like that.
SRVO-289 Smooth Stop
-
bencor21 -
January 6, 2020 at 4:24 PM -
Thread is Unresolved
-
-
I remember reading something about this in the safety manual which is linked to a specific stop pattern A or C or D relative to the safety devices of the controller (Estop, Ext Estop, Safety Fence, Deadmans).
, which incorporated a change in stop category (0 and 1) with the associated safety devices.
I would look in the 'menu'/'status'/'Version ID' to see which stop pattern is in use and reference the safety manual and see if this ties in with what you're experiencing, expecting.
-
Thanks. Good point. This is an R30iB+ controller & it just might be something newer I haven't ran across yet.