i had an older version of fanuc ladder III (v6.70) that I am attempting to import the ladder.pmc file to. Robot is an R-30ia controller with version 7.3 on it. After contacting fanuc tech support they told me I needed a newer version of fanuc ladder. OK, no problem. I ordered version 8.70 and installed that. I still get the same Format error of S0 record when attemting to import the pmc file.
Talking with Fanuc again after this hasn't got me anywhere.
So hopefully one of you can give me a hand. It may be something silly I'm doing wrong. It's been a few years since i modified a robot ladder.
Here's what I did.
Created a new program Called PR11LD
Set device to robot and PMC type to R30ib (since that's the only option)
PMC path left on 1st, instruction, symbol and comment all standard.
I did not set anything under FB Library or I/O Link
From here I attempt to import LADDER.PMC as Handy-file Format. The ladder file I am importing is from a robot backup. That's the only thing that I can think I might be doing wrong?
Any help is appreciated!