The alarm relates to Robot 1. 8001 (R1)
Open [Lincoln Setup], then reboot. The previous alarm (8001 [21]-[24]) was ignored. You cannot weld or touchsense until this is resolved.
Open [Arc Welding] > [Lincoln Setup]. Follow the instructions on screen, then reboot the robot controller.
The alarm relates to Robot 1. 8001 (R1)
Open [Lincoln Setup], then reboot. The previous alarm (8001 [21]-[24]) was ignored. You cannot weld or touchsense until this is resolved.
Open [Arc Welding] > [Lincoln Setup]. Follow the instructions on screen, then reboot the robot controller.
Mind telling me what alarm (8001 [21]-[24]) is?
[21] is something with the welder system has changed. You need to open [Lincoln Setup] and allow the system to rebuild some of the data for the weld settings.
Open [Arc Welding] > [Lincoln Setup]. Wait for the Arc Data to update, then reboot the robot controller.
[22] The system has just been upgraded from an old version and needs to update some weld settings.
Open [Arc Welding] > [Lincoln Setup]. Wait for the Arc Data to save, then reboot the robot controller.
[23] The system has just been upgraded from an old version and needs to update some weld settings.
Open [Arc Welding] > [Lincoln Setup]. Wait for the Arc Data to save, then reboot the robot controller.
[24] An ASF was loaded using the normal Ex Memory menu instead of the using the [Lincoln Setup] screen.
Open [Arc Welding] > [Lincoln Setup]. Wait for the Arc Data to save, then reboot the robot controller.
You need to be a member in order to leave a comment
