***** Perfect example of how to present your post, controller details, images and clear explanation of problem *****
New to the forum, but wanted to say there are some high caliber techs in here. I've read through quite a few threads, and it was pleasantly humbling, not that I'm much of a measuring stick.
Thank you for taking the time to help
I have a C-Series Controller P/N: C32F-A005 from 2011
It is a welding unit
After first getting the unit all hooked up I was getting a bunch of errors, so I reinitialized and went through the manual and got rid of all of them.
Now the unit will enable the motors in Repeat mode.
My issue is that I cannot enable the motors in Teach mode. I want to be able to jog this thing around before I try making/loading programs onto it to play.
There are no Red LEDs on the internal boards
I do not see any indication of E-Stop issues
There is no connector/Terminal called X-LNE1
I do currently have
Error -1511 Encoder Batt Fault
Error - 1800 AC Primary Power OFF Fault
Upon startup, but they clear and the controller still enables motors in Repeat mode.
Thank you again for you help
Let me know if any additional pics are needed.
Respectfully,
Tyler