694/5000
// English //
Good afternoon. I apologize for my english. I came here for help and knowledge.
I want to connect via Profibus DP a KRC4C with a PLC Vipa 014-CEF0R00 and then control the movements from an HMI with MX Automation. PLC VIPA (Master) and KRC (Slave).
I am using a Beckhofft EK1100 gateway and a Profibus Slave 6731-0010, connected to the X65 of the KRC. I downloaded the necessary GSD and configured it from WorkVisual 4, added the System bus 44 and made the download.
Currently I have the notifications in the SmartPad (images), I have the connections, and I already configure the I / O of the KRC.
I have programmed the VIPA from Simatic Manager 7 and I do not have bit exchange.
Someone who wants to help me or guide me.
//Spanish//
Buenas tardes. Me disculpo por mi Inglés. Vine aquí por ayuda y conocimiento.
Quiero conectar via Profibus DP un KRC4C con un PLC Vipa 014-CEF0R00 y después controlar los movimientos desde un HMI con MX Automation. PLC VIPA (Master) y KRC (Slave).
Estoy usando un gateway Beckhofft EK1100 y un Profibus Slave 6731-0010, conectado al x65 del KRC. Eh descargado los GSD necesarios y configurado desde WorkVisual 4, añadí el System bus 44 e hice la descarga.
Actualmente tengo las notificaciones en el SmartPad (imagenes), tengo las conexiones, y ya configure los I/O del KRC.
Eh programado el VIPA desde Simatic Manager 7 y no tengo intercambio de bits.
Alguien que me quiera ayudar u orientar.