Hello Friends
I have a question about communication between plc and and a virtual controller of an Abb robot in robostudio.Is it possible for example to set io in RS(robostudio) and read and write to/from a real plc.I added my communication picture from tia portal also.Plc will be master.I added also gsdml file for robot controller.Can I use this gsdml file for virtual robot in RS?
Devices are like this
-Hmi(created in Tia portal) will be in my own pc(ip for my pc 192.168.0.2)
-RS as virtual controller in same pc
-plc (I am using s7 1200 I have it as a hardware not virtual 192.168.0.1)
-cognex camera (I have it as a hardware not virtual 192.168.0.3)