Is there a way to view the addressing to display on an HMI?
I have an HMI with the correct drivers, kinda want to poke around and see what all it can do, things like error history and such are pre-programmed, but finding the correct addresses seem to be futile.
-Are they different from machine to machine?
DX200 HMI addressing
-
Crowmagnus -
August 2, 2018 at 8:29 PM -
Thread is marked as Resolved.
-
-
Yaskawa has a communication protocol HSES ( High speed ethernet server ), which enables a Proface or Vipa panel to communicate with the robot. There is almost no limit to what information you can exchange via HSES. Also, there is MotoModbus, which can be used with all ModBus panels.
If you go to Proface.com, or Otasuke.Com, you can get a manual, explaining how that driver works.
-
I'll check those out. I connect to my laptop via Ethernet for MotoSim all the time. Thanks!