I followed the directions in this forum on backing up my CMOS. Got a 16mb sandisk CF card and pcmcia adapter, formatted on old camera, booting into maintenance mode, saved the CMOS... it beeped after a few seconds, like it seemed happy. But no feedback that it successfully saved. Then, when I boot into the regular user mode, and select "Verify," I don't see any indication that the save file is on the card (see attached pic). All the numbers in the rightmost column (which I'm assuming are file counts) are zero.
What's the easiest way to verify that I have a clean backup? I don't want to actually load the backup, unless absolutely necessary.