KSS 8.3.27, KRC4, KR16
Hi, I have problem with KRC4. I can't add new or edit old move command like SPTP, SLIN etc. because of error "SetVarFaild". Did anyone have this problem and know how to solve it?
KSS 8.3.27, KRC4, KR16
Hi, I have problem with KRC4. I can't add new or edit old move command like SPTP, SLIN etc. because of error "SetVarFaild". Did anyone have this problem and know how to solve it?
read READ FIRST...
is matching DAT file present?
is it write protected?
is same happening when you create new program module?
KSS 8.3.27, KRC4, KR16
is matching DAT file present?
I dont know. How can I check it? Program is working so I think DAT is ok. If not how can I make it matching?
is it write protected?
how to check if it is write protected? I think it can be true. But I also cannot download entire project from KRC4 to work visual...
is same happening when you create new program module?
I did't try, but will do it
I prefer to help those who can follow instructions. you skipped first step...
I prefer to help those who can follow instructions. you skipped first step...
I'm sorry if I did something wrong. I added informations about KSS and robot. I am new here and I want to do well so forgive me my mistakes, please.
I really appreciate your help
read READ FIRST...
[color=rgb(204, 51, 51)]https://www.robot-forum.com/robotforum/kuk…rum/read-first/[/color]
I read it twice. I cannot upload better photo of full screen now. And this is onformation about robot: KSS 8.3.27, KRC4, KR16. Sorry for my english, i do my best
i have no objection to image quality but .... waste... (image size). you would have notices that IF you really read the link i provided.
i am asking everyone to be a good citizen and not post crap so we can all benefit from this great resource. this site is free and runs on someones hard work and out of pocket spending (not yours). forum was experiencing outages, lots of old posts (with good content) had to be removed because of inconsiderate users that hog the space with their stupid (unnecessarily large) attachments. even manuals section in the forum is suffering since large attachments are not allowed.
so you want help? how about starting to help us first?
for example try:
1. crop and resize that image to something reasonable. It will save the drive space and many posts. it will help others load page faster (specially when not on broadband).
2. READ first is not only about how to act but where to find info and what are the most important resources. use it... this is a forum - not school.
checking those 2-3 must have manuals or using forum search would get you answers in seconds. and you will find more interesting things you may not have asked for yet.
3. i do my best to keep this clean and useful. topic with 20 posts about something that shows up in first search is NOT useful, just makes mess and harder to find useful content. AFTER you have exhausted those resources (read first, system integrator manual, tried something..) and still need help, I will be happy to answer (assuming it is worth my time and does not tick me off). but those are my policies, other forum members are free to use their own - maybe they help you without bashing... you wanna a give it a try? [size=78%] [/size]
OK, sorry, I didn't notice that this file is so big... I have already fixed it.
OK, I try to find sothing on my own, but if you can give me some advice, please help me.
you need to login as expert, only then you can see files individually...
refer to programming manual for system integrators...
Yes, I know that. There is a dat file and program is working perfectly. But i cant add any kind of move or change existing one. Can you tell me how to change access protection of this file if this is the problem?
EDIT: I have one dat file without src. is this causing the problem?
UPDATE
I've checked today and I noticed that I can add or edit only PTP AND SPTP move command. With SLIN and SCIRC is no problem. There are SetVarFailed and redecl.. errors.