Dear All,
My machine details are given below.
My machine was powered off and two node addresses were disconnected.
When machine was powered on, we lost its configuration for the nodes.
Is it true that we can not power on KRC4 if two nodes are disconnected or replaced at the same time?
Version=V8.3.20
[TechPacks]
TechPacks=KUKA.DirectoryLoader|KUKA.SmartPadRotation|ProConOS 4-1|Profinet KRC-Nexxt|
KUKA.DirectoryLoader=2.2.2
KUKA.SmartPadRotation=1.1.0
ProConOS 4-1=4.1.4
Profinet KRC-Nexxt=3.2.1