Hi,i never work with Fanuc robot ,only with ABB and Kuka.
i need to open the ladder from PMC offline,online from iPendant i can see it
i have, like hardware a robot M20iA with system R-30iB,integrated PMC, production date 2016-10,
like software i have Fapt ladder 3 version 6.9 and roboguide ver 8(revL)
i made a backup from robot and i have 2 file LADDER1.PMC and PARAM1.PMC ,
I look on old topic and i try to import like handy file but Don't work
i have and a older file "Ladder E91248.LAD" I still not be able to open it, even if the Fapt ladder
sees it as like o Ladder file
THE error is "PMC TYPE NOT SUPORTED"
Thank's
Fapt ladder for M20iA with r-30iB siystem
-
mceprazov -
November 11, 2017 at 1:23 PM -
Thread is marked as Resolved.
-
-
Hello, mceprazov.
When try open the PMC files, did You proceed the like this?
-
Do you have Fanuc Ladder 3 for Robots? There is a difference vs. the version for CNC.
-
No , i have for CNC.
It is a addin or a difrent program?
Thank you -
And yes, i try exactly like on topic
May be because i need FAPT ladder for robot.
I didn't now are difrent programThank you
-
I don't know if this could be related, but FAPT Ladder III 6.9 is from 2012, and R-30iB were released in 2013, if I recall correctly.
Did you have a .pmc file from an oldee controller?
And, yep, there is a version of FAPT Ladder specific for robots.
-
No, i haven't o Old program,
I must ask fanuc for The robot version
Thans a lot