Hello,
I have a problema with a Yaskawa Robot, the alarm said low battery and i change the battery, and the alarm stay... what can i do ?
Thanks
Hello,
I have a problema with a Yaskawa Robot, the alarm said low battery and i change the battery, and the alarm stay... what can i do ?
Thanks
Which battery did you change? This error refers to the battery inside the robot controller that backs up program memory.
i change battery CN110/BAT in YCP01B-E
Someone can help me?
The machine don´t work because this... thanks
The batteries only hold the memory in case of power loss. It should not keep the robot from running.
Hi, the battery inside the robot controller needs to be replaced, But to make it work again you will need to load a CMOS.bin backup, If you don't have a backup you will need to initialize the system but you will need a Yaskawa tech, since I guess you don't have the password for Yaskawa mode.
thanks
the problem are solved... we need load again the program.
thanks
the problem are solved... we need load again the program.
Can you give me steps to solve it? thanks a lot!
Can you give me steps to solve it? thanks a lot!
What is it to solve? Reloading cmos? Reloading programs? Changing a battery? What generation of controller?