I prepare for a project about new auto factory. In there, we will assembly some robot for body shop. So i want everybody help me some information as below:
1. How can connect the Gun with robot (can share some picture)? ( use Timer of Nadex, Gun of Obara). Change Gun of Kawasaki robot is very easy, right?
2. Detail guide about setup the parameter (welding condition) for robot? and Teach for robot spot welding?
3. Some exceptional features of robot welding Kawasaki.
4. How is the service of kawasaki?
Help me some information about welding robot?
-
phanthanhviet -
May 16, 2017 at 11:17 AM -
Thread is marked as Resolved.
-
-
The thread below has some discussions on this matter - Maybe worth sending the starter a PM and see how they progressed as a start.
1. As far as 'physically' connecting it......just bolt it on, connect the services required (is it servo or pneumatic), connect the cooling.
2. Never come across any guides, except what I have seen in the manuals - Mostly driven by the Gun manufacturer.
I do know that Kawasaki and Obara have a good relationship and I believe they supply all the relevant 'gun details' (TCP, stroke/ pressure etc) that you would enter into the Aux Configuration Settings in the Controller.
I would contact Obara for those.3. Some exceptional features? - Not sure what you mean, can you be more specific.
4. As for the 'Service', I've never had any issues when contacting Kawasaki.