I am currently working on an M20 with pretty new software V8.30/P28(IIRC) and I am having an annoying quirk. Lets say the robot is running in Auto and I have the program running on the left side of the pendant and I have the Position Registers open on the right side. If I try to open a position register to change the value of say Z the screen keeps jumping back to the left side and then I have to keep hitting the Display button to get it back over to the right side so I can finish whatever Im trying to do. I had seen this happen before on older robots, but don't recall this happening on any newer robots. Is there a way to prevent this? Any idea what the trigger is that causes it to jump back to the left side? Sometimes it might wait 5+ seconds to jump to the left side, but other times as soon as I switch it to the right side it switches right back to the left side.
Any help would be appreciated, this gets really annoying when you are trying to do things on the right screen.
