Hi everybody!
I´m new in this forum, and also in robots, I´dont have too much experience.
I work as a teacher in a school, a factory donated to us a nx100 controller with an hp20 robot with an educational purpose.
It had been without use for a year aprox.
I connected it, but it doesn´t give any choice to turn on the servo, it only shows the maintenance mode on the teach pendant.
I read the manuals and one possible cause was the backup battery, it was dead, I replaced and ther was no change, also I made a recovery of the cmos.bin from the cfcard, and the same results.
any help?!!!
Thanks