ABB IRC5 CHANGE SAFETY USER PASSWORD FOR SAFETY SYNC

I don't know how to change existed password but you can create new safety user with Robot Studio Online tool.

Request write access from RobotStudio:

1. In the Online browser, right-click on the controller and select Request Write Access.
If in manual mode, confirm the write access on the FlexPendant.
2. Start UAS Administrative Tool:
In the Online browser, right-click on the controller and select Authenticate and then
Edit User Accounts.
3. Select the tab Groups.
4. Click Add and type a name for the group, e.g. "Safety".
5. Select the group you have created and select the check boxes for the controller grants:
• Execute program
• Safety Controller configuration
• Write access to controller disks
The group may have more grants, but these are the minimum required.
6. Select the tab Users.
7. Click Add and type a name for the user, e.g. "SafetyUser", and a password for the user.
8. Select the user you have created and check the group you previously created, e.g.
Safety.
The user may belong to more groups.
9. Click OK.
10. Restart the controller.

TIP!
Create different user groups as described in Operating manual - RobotStudio, section
Managing the user authorization system. Make sure that one administrator has the grant
Manage UAS settings and that the regular users (operators, Default user, etc.) do not have the
grants Safety Controller configuration, Write access to controller or Manage UAS settings.