Dear all
I familiar with KUKA and HYUNDAI robot programming but I don't have any experience in Yaskawa Motoman robot yet,
In the next month fortunately I will work in a robotic paint shop so I would therefore be grateful if you could send me some documentation such as operation and also advance programming manual our robot is MPX 3500 with controller DX200.
Thank you in advance.
Best regards

MPX 3500 with controller DX200.
-
fal343 -
November 6, 2016 at 2:44 PM -
Thread is Resolved
-
-
For manuals you can go to this page
https://www.motoman.com/manuals/?submi…09-309e6fa22b58
You need only to inpunt your name/email and you will be redirect to manuals page. Then, go under tab "programming".I suggest you to contact your Yaskawa representative for course and training.