There is a error when I create a robot system from backup in robotstudio,the system cannot find the 3HEA-01520-50029 additional mediapool.
Then I check the backupinfo,there is a 3HEA-01520-500297 in the products. So where can I get the 3HEA additional mediapool ?Thanks a lot.
there is the backupinfo :
>>SYSTEM_ID:
1520-500297
>>PRODUCTS_ID:
RobotWare Version: 5.61.1001.01
3HEA-01520-500297 Version: 1.00.0000.01
RW Control module key
RobotWare OS and English
644-5 Chinese
709-x DeviceNet
709-1 DeviceNet m/s
604-1 MultiMove Coordinated
634-1 MultiProcess
662-1 Manipulator 1 with arc welding
663-2 Manipulator 2 with arc welding
608-1 World Zones
611-1 Path Recovery
613-1 Collision Detection
812-1 Production Manager
633-1 Arc
650-x Power source type
650-9 Fronius TPS4000/5000
3HEA-01520-500297.01
RW Drive module 1 key
ABB standard manipulator
IRB 1520
IRB 1520ID
1520ID-4/1.5
Drive System 09 1600/1520
Additional drive
ADU-790A in position X3
No drive in position Y3
RW Drive module 2 key
ABB standard manipulator
IRB 1520
IRB 1520ID
1520ID-4/1.5
Drive System 09 1600/1520
No additional drive
>>ROBOT_TYPE:
1520ID-4/1.5
1520ID-4/1.5