Dear All Vw Forum guys
I have a question .....about the Bin Values that we set ..
In the robot Backup where can i see which outputs are assigned to bin1 or bin2 for example.
This is what i got in my Program
-- Bin14-Motor 1 ein --
bin14 ( !A11 ) = 6
-- Bin15 (Parameter 4) --
bin15 ( !A11 ) = 65
Ok Now i want to find out which 8 bits are mapped to bin14 and bin15 .What input is the starting address. I want to check this in the robot back up. I can see where it is in the Robot controller no problem.
But once we assign it from the teach pendent , where it is saved in the backup? Similar to configuring automatic external signals.
Thanks Paul