Hi This looks like Polo standard !
1.VW_USER SP2 NORGREN WZGNr=1 Pismo=2200 Ausg1=120 Kraft=65 Blech=10
( this the line used to tell the Welding Gun Module ( Norgren ) 2200 opening distance , 120 is your balancing pressure , pressure 65 , sheet sthickness 10)
2.bin (EIN)=3203
This line normally Bin1 sends the bosch weld timer what welding program number it must weld. ( u can find this in the bosch software ( spot list)
3.SPS MAKRO80=EIN
Makro 80 is used for the Operator to enter station ( if u press the push button on the station robot wil stop )
4.SPS MAKRO212=EIN
makro 212 open the gun to Mid position
5.SPS MAKRO214=EIN
Makro 214 is your welding makro
6.bin (EIN)=3203
Normally this bin no should be the next point's weld number ( you send it in advance)
Hope i explained OK.
if u need any assistance message me.
Cheers
Paul