I have NX100 with EA1400 ,I want to see current and voltage during welding in teach pendent.
NX100 with EA1400
-
bhaweshnikey03 -
April 28, 2016 at 12:30 PM -
Thread is marked as Resolved.
-
-
Check your ARCON or ARCOF command for either an in-line instruction such as
ARCON AC=300 AV=21
This gives you current of 300A, arc voltage of 21.If your ARCON looks like this,
ARCON ASF#(1)
ARCOF AEF#(2)
then press DIRECT OPEN key on the ARCON or ARCOF command to go in and see your current and voltage in the actual Arc Start File.