On the face of the IRC5 controller, there is a round white light/push button just below the e-stop. When the solid white light is on, it means the motor is on. While the light is blinking or off, what happens if I press that push button? I cannot imagine pushing that button will complte the runchains therefore will not energize the axis motors. What is the push button for?
white led/push button below the e-stop of IRC5 controller
-
unsaint43 -
February 18, 2016 at 10:50 AM -
Thread is marked as Resolved.
-
-
White illuminated push button doing "Emergency stop reset" or apply "Motor On" signal.
If this button not linked to MotorOn in system parameters or MotorOff signal is True from external you can't make Motor On.