Hi,
I get this fault
DNET-125 Slave Conn. Idle: Bd 2 Fault
Any ideas?
DNET-125 Slave Conn. Idle: Bd 2 Fault
-
slamcity -
November 4, 2015 at 8:29 PM -
Thread is marked as Resolved.
-
-
Have you connected the daughter DNET board of your robot to it's master?
**If yes and link is ok on both sides, this warning usually appears when there is no data exchange between the Master DNET station and slave (your robot) takes place.
Let us know if you find out something more specific.