can anyone see why this case statement isn't liked by a D+ controller?
it keeps throwing up 'no value after case'
;
;CASE pick_count[line_pick] OF
;VALUE 1,3,6,8:
;// Use Pick location for 3 or 5 boxes in right side of griper
pick_select[line_pick] = 35
;
;VALUE 2,4:
;// Use Pick location for 5 boxes in left side of griper
;pick_select[line_pick] = 5
;
;VALUE 5,7:
;// Use Pick location for 3 boxes in left side of griper
;;pick_select[line_pick] = 3
;
;END; Of case
Thanks in advance