Hello All, We have been experiencing camera cable failures quite often on our 200T under-slung robots. The cable is an made by Empire and it runs from J2-J6. Just wondering if anyone else has had issues like this and if so, what was the fix? Any input would be appreciated. I have attached a picture of one of the damaged cables we changed out today.
iR Vision Camera Cable Issues (R2000iB 200T-Underslung)
-
robmx57 -
August 11, 2015 at 4:38 PM -
Thread is marked as Resolved.
-
-
I had experienced that the wire of the TP is broken. And then I checked each wire until I fond which wire was broken. I connected the wire manually and soldered the joint. Finally, I fixed it with electrical tape. There is no problem until now.