Hi everybody,
Just like the title says I'm installing a light tower on a cell we've built around our RJ-3iB but I'm not quite sure where to get all the signals i'm looking for. I know I'll be getting my signal from the CRM2A plug just not sure which pins.
I'd like to have a light for; FAULT, READY, FENCE BROKEN, & RUNNING
I assume FAULT will be pin 39, READY will be pin 34, RUNNING would be 35? or 44?, and I have No Idea where Fence Broken would come from. Any help would be appreciated.
I have a Pic of the plug and labels but I'll post it as the next comment in case admit needs to delete it.
Need help with outputs to a light tower
-
Decipherlogic -
December 15, 2014 at 7:45 PM -
Thread is marked as Resolved.
-
-
CRM2a/b
-
I am thinking I can run the "Fence Broken" light off of the N.C. side of the interlock. Does anyone know, if I do this do I need to wire anything else inline with the interlock to protect the controller against damage? Also, is the "Fence Circuit" capable of supporting 2x 24V 10w lights?