On a s4 M94A controller I tried to save the system parameters to floppy, but the system stays in status waiting for end of writing to floppy.
Problem is I cannot exit that status.
I do not whish to cut the power because the battery is not ok anymore.
What ways are there to do a warm restart whithout power cut and when the teachpendant is frozen? Or some way to leave the blocked status whithout power cut?
S4 M94A : warm restart when teach pendant 'hangs'
-
Plc_User -
June 13, 2014 at 9:33 PM -
Thread is marked as Resolved.
-
-
You can use the INIT push-button located on the backplane. It will do the same action as switching power on.