Next week I have to look at an S4C robot.
Has this type already an ethernet card onboar? I thought the S4C+ always has. But this type is older, is the ethernet card standard, optional, or not available?
Suppose there is something wrong with the operating system, do I need a boot disk? What if the bootdisk is lost?
Or is a key enough to generate a new robotware with robinstal?
S4C : bootdisk?
-
Plc_User -
February 14, 2014 at 9:25 PM -
Thread is marked as Resolved.
-
-
S4C+ has the ethernet card however this port is use to backup and FTP , NFS and communication with robinstal.
If you need reinstall the system, you can install by boot disc or use the key and robinstall.
-
Ok,
but the type involved is an S4C and not an S4C+ -
Ow sorry, I understood wrong way.
S4C
This card is not a standard card.
When is necessary it have to installed the optinal card, DSCQ 336.Then, is possible to access the files to bakcup or install the system operation.
On S4C, you need have the key disc and system pack. Robinstall only M2000 controller.