i have the next servomotor
1FK6100-8AF71-1Z29-ZS09
NRE H884 627603001
3.77KW 9.A 156V
ART NR 69225463
ITS COMPATIBLE FOR USE WITH A KR150 SERIE 2000 KRC2?
WHAT TYPE OF SERVO DRIVE CAN I USE ?
THANKS
i have the next servomotor
1FK6100-8AF71-1Z29-ZS09
NRE H884 627603001
3.77KW 9.A 156V
ART NR 69225463
ITS COMPATIBLE FOR USE WITH A KR150 SERIE 2000 KRC2?
WHAT TYPE OF SERVO DRIVE CAN I USE ?
THANKS
AC Servo and should have resolver feedback and also compatible connector for easy connection to cables.
Shaft type can be important.
Its an old type B motor off a kr30/60 axis 1-2 or from a Kr125 - kr 200 axis 1- 3
What do you want to use it for ?
i have a unit lineal, and i want to add with a robot KR210L150 KRC2, this motor its compatible to use with krc2?
what kind of servo drive have to use?
thanks
It is yes you need a 32 amp servo for this you can check the mada from the robots i sent you
If you install the KL1500 mada it would be a starting point for you as its the same size servo
where is the file?
On the d drive under krc1cd internat
Sent from my Nexus 5 using Tapatalk
thnks , so what kind of servodrive i need?
32 amp
Sent from my Nexus 5 using Tapatalk