has anyone successfully configured a Numatics valve bank with an Ethernet I/P G3 module to work with an IRC5 controller that has the Ethernet master/slave option?
I am currently trying to get it to work an I am getting a connection error.
here is my EIO Config in short.
#
EIO_BUS
-Name "EtherNetIP1" -BusType "ENIP" -ConnectorID "ETH1"\
-ConnectorLabel "EtherNet/IP" -EN_Address "192.168.0.100"\
-EN_SubnetMask "255.255.255.0"
#
EIO_UNIT_TYPE
-Name "g3" -BusType "ENIP" -VendorName "Numatics Inc"\
-ProductName "Numatics G3" -EN_VendorId 52 -EN_DeviceType 12\
-EN_ProductCode 101 -EN_OutputAssembly 150\
-EN_InputAssembly 100 -EN_ConfigAssembly 1 -EN_OutputSize 8 -EN_InputSize 8
#
EIO_UNIT
-Name "valve_bank" -UnitType "g3" -Bus "EtherNetIP1"\
-EN_Address "192.168.0.120"