Ok...this pic is nothing sexy, but it proves I CAN do it Better days ahead
Vvelikov: have you tried anything with a rotary table using SprutCAM? I'm considering buying some used Kuka parts to build my own table.
Ok...this pic is nothing sexy, but it proves I CAN do it Better days ahead
Vvelikov: have you tried anything with a rotary table using SprutCAM? I'm considering buying some used Kuka parts to build my own table.
it IS sexy seems that you managed to do it, congrats!
as for the table - no i didn't, but i am also planning to build one - will share how it is going when start. I bought half a robot A1 A2 and A3 and i am planning to make a table as well!
SprutCAM Robot for KUKA with rotary table (start from 0:45)
http://youtu.be/5xJKe2JK7pE?t=57s
Hi,
Anyone have Kuka KR 30/2 to import to sprutcam robot 11, i download trial version and want to tray. What if i just change the parameters of robot axis? Just simulation go wrong or all go wrong?
I am completly new to robotics.
Thank you
If you change the axis parameters, the simulation can be wrong as long your tool parameters - XYZABC data are corresponding to the real robot ones.
I don't have that model unfortunately