Hi everyone.
i have an arcmate 100iC with which we are using torchmate block.
after i set my tcp :
X: -110.447 Y: 0.445 Z: 374.741
W: -180 P: -45 R: 0
After i run torchmate :
X: -110.9 Y: 0.3 Z: 374.3
W: -180 P: -45 R: -0.0
I know there is just a difference of 0.4MM but why does the value of the Z change when Z compensation is disabled?
Any idea??
Thank you!