Posts by Taro Double
-
-
Hello Seulki , thank you for your help and response.
Presently, I am trying other options and will later do what you have informed.
-
Thank you for your response SkyeFire and hermann.
hermann, as for additional question, is there any other option or way that we can do this setup?
Like, need an additional hardware or software?
-
Thank you, this is my first time post.
-
Need help please.
I would like to use interlock IO (emergency stop, start command, servo ON command, etc.) using EtherCat to CC-Link with Anybus X-gateway name on it.
How do I set this up? If you have a manual, please let me know.
Thank you in advance.
-
Need help please.
After inserting package to controller, an error message below appeared.
Please let me know what could be the problem.
Transfer failed.
The local station configuration is not the same as the one on the controller.
Either adjust the local station configuration and reinstall the station configuration, or load a project from the controller and accept the station configuration from the controller.
More information on the differences can be found here.
Topology Element 'KAKU_Sunrise_Cabinet_1': The selection of software elements is different. The following elements have been selected for one of the configurations only
Ikarus AntiVirus Definition Files(v.99244)
Ikarus AntiVirus(v.2.7.30)
Ikarus AntiVirus SmartHMI(v.1.8.0)
Ikarus AntiVirus Service(v.1.15.0.5)
com.kaku.service.virusScanner.ncf(v.1.15.05)
Thank you in advance.