Posts by Loreno
-
-
What brand is your CF card?
Cisco, and transcend
-
Okay, now that we know the whole story, try this.
Put your 128meg card in a PC and do these commands;
- Open a command Window (Windows+r > cmd)
- diskpart
A new window will open up with a “diskpart>” prompt - list disk
- select disk n (where n is the number of your CF card)
- Clean all (this completely re-formats the disk – it will take a while and appear to hang but be patient)
- create partition primary size=32
- Select partition 1
- Active
- format fs=fat
- Assign
- Exit
Your 128meg card is now 32meg. You will have to format it in a camera. If it still does not work the CF card you have is uncompatable with the XRC controller.
I did this and it still doesn't work.
-
I tested CF card with 128 and 256 meg in XRC and it worked.
What card model?
-
Ok, Thanks.
-
If you have DX series controller, you can format your CF card under its windows, it is the best way that i check it and create a CF card for XRC.
If you have DX series controller, you can format your CF card under its windows, it is the best way that i check it and create a CF card for XRC.
This how is it done? I've tried and don't have the option to format by inserting the card into the console.
-
-
When I try to load I get error 3080
-
Yes, I have 3 XRC controllers, 1 dx100. In XRC they don't work. only in dx100. I'll try the old camera. I believed that somehow it could be formatted with dx100.
-
So the size of the card is too big?
32 mb y 128mb.
-
Ahora estoy realmente confundido, primero preguntaste sobre el formateo en DX100, pero luego nos dices que es para XRC. Entonces, ¿tienes el controlador XRC también? Si es así, formatéelo en el controlador XRC y listo.
Sorry, I did not explain well. I have XRC and dx100 controllers. XRC does not read my card and does not allow me to format. So I ask how to format in dx100 if it reads the card. Sorry for my words too. I'm Spanish and I'm not fluent in English
-
Necesita una cámara antigua que admita tarjetas CF. Formatee en la cámara y el XRC funcionará.
Recuerde que la mayoría de los robots XRC solo tienen un tamaño de 32 meg. Algunos tomarán hasta 64meg, pero nada más.
There is no way to do it with DX100?
-
You can go to DX100 windows OS and format your CF card that installed on the pendant.
I already did this and it doesn't work. Fat, fat32, ntfs does not work in XRC. I want to format it so that it is recognized by XRC.
-
Have not seen that ability since the XRC.
I want to do it on a DX100
-
Hello,
Does anyone know how to format the CF card on a DX100?
Thanks.