It wasn't important the model of CF card only i use CF with 128 and 256 mb capacity.
Format CF card in DX100
- Loreno
- Thread is Unresolved
-
-
Okay, now that we know the whole story, try this.
Put your 128meg card in a PC and do these commands;
- Open a command Window (Windows+r > cmd)
- diskpart
A new window will open up with a “diskpart>” prompt - list disk
- select disk n (where n is the number of your CF card)
- Clean all (this completely re-formats the disk – it will take a while and appear to hang but be patient)
- create partition primary size=32
- Select partition 1
- Active
- format fs=fat
- Assign
- Exit
Your 128meg card is now 32meg. You will have to format it in a camera. If it still does not work the CF card you have is uncompatable with the XRC controller.
I did this and it still doesn't work.
-
What brand is your CF card?
-
What brand is your CF card?
Cisco, and transcend
-
There's another problem. The preferred CF card from Yaskawa is Sandisk. Some other CF cards do not work at all in the XRC controller.
-
Robodoc, that is one reason why I suggested he read this thread, CF Cards Capacity where you mentioned that already to another user.
There's another problem. The preferred CF card from Yaskawa is Sandisk. Some other CF cards do not work at all in the XRC controller.
-
Ok, Thanks.