Posts by KUKA_Robot_Lovers

RS232 Communication???

Quote from Ethan3721

Hi guys,

after update to Fanuc Roboguide 9 Rev. ZD, can't find the "FIND AND REPLACE" FUNCTION in "Teach" option.

Hai, guy,can you share the Fanuc Roboguide 9 Rev. ZD software download link?

Hopely!

Look at this pirture, the value range from 0 to 300, for LIN

Look at this pirture, the value range from 0 to 1000, for PTP

How to set the value of 'CONT' correctly?

For KRC4 system,its value ranges from 0 to 1000.

Incorrect setting will cause track collision?

How appropriate is the general setting?

I have tested

Only support FANUC System Ver8.30

C:\Users\***>fexcel create ./spreadsheet.xlsx 127.0.0.101

__ _

/ _| | |

| |_ _____ _____ ___| |

| _/ _ \ \/ / __/ _ \ |

| __/> < (_| __/ |

|_| \___/_/\_\___\___|_|

v2.0.0

by ONE Robotics Company

http://www.onerobotics.com

Error: no cell locations defined

and also error happened!!!

Quote from jay

Hi KUKA_Robot_Lovers ,

Sounds like either you mistyped the program name or your command prompt doesn't know where the exe is.

1. Make sure your cmd prompt is in the same directory as fexcel (e.g. C:\Users\KUKA_Robot_Lovers\Downloads) or place fexcel somewhere on your system's PATH

2. If you're in the same directory as the exe, you should be able to type "fexcel" then TAB to complete the rest of the filename

3. Use "fexcel help" for more information on the various command line flags

Hope this helps.

Display More

command:

C:\Users\***>fexcel --sheet Data --numregs A2 spreadsheet.xlsx 127.0.0.1

Error: requires a spreadsheet

some problem happened

and how to solved it?

Hi,jay,

I don't know how to use this .exe file

After executing the command, the CMD window shows "Not an internal command or external command"

Please forgive my ignorance of computer knowledge.

Looking forward to your answer, thank you!