I'll try reteaching the image and see if that helps. Still don't understand why it would fail an image even though it was reporting the scale as between the limits which were set.
Posts by HeadlessEng
-
-
Image and results for the part which failed. I'm hoping that its something simple which I missed that's causing it at this stage. Only difference between the images are the limits for the scaling. I've gone through enabling each DOF individually and scale is the only one which changes result.
-
Sorry, my fault for incorrectly wording it. Its reporting back the scale as 98.5 not the score. The elasticity was already set to 3 pixels so I'd be surprised if that was the issue.
-
The camera is fix mounted and the part is stationary.
Its the same image which passes at 97-102 but fails at 98-102.
I'll post the image once I get back. -
Hi guys,
I have encountered a strange occurrence when using the vision system. The system is failing an image which is within all the limits set in the program. I've gone through the other limits and tools and I have checked each individually The problem seems to be with the scaling limit. The limit is set from 98 – 102, the scale is reading 98.5 and the part is being failed. When the limit is changed to 97 – 102 the part passes. I haven't come up with any logical explanation as to why this occurs so hopefully someone can provide some insight.
TIA
Edit: Fixed wording